CLBRN - PYROMET 680 HI TEMP ALLOY, 5510941

  • MSDS: CLBRN
  • Manufacturer: CARPENTER TECHNOLOGY CORP
  • Product Name: PYROMET 680 HI TEMP ALLOY, 5510941
  • National Stock Number: 3439-00-882-7351
Product Identification

Product ID:PYROMET 680 HI TEMP ALLOY, 5510941
MSDS Date:10/01/2000
FSC:3439
NIIN:00-882-7351
Status Code:A
MSDS Number: CLBRN

Responsible Party
CARPENTER TECHNOLOGY CORP
101 W BERN ST
READING, PA 19612-4662
US

Emergency Phone: 610-208-2134; 208-2457

Info Phone: 610-208-2134 / 610-208-2457/2463

Cage: 71321

Contractor
JO-JON INC
UNKNOW SPARKS, NV 89431 US

Telephone: 702-356-6988

Cage: 009J0

Ingredients

NICKEL

CAS: 7440-02-0

RTECS: QR5950000

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3


CHROMIUM

CAS: 7440-47-3

RTECS: GB4200000

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


IRON (REGULATED IN OXIDE FORM)

CAS: 1309-37-1

RTECS: NO7400000

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3;2 PPM


MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

OSHA PEL 5 MG/M3 (SOL)

ACGIH TLV: 10 MG/M3 (INSOL)


MANGANESE

CAS: 7439-96-5

RTECS: OO9275000

OSHA PEL 5 MG/M3 C

ACGIH TLV: 0.2 MG/M3 C


TUNGSTEN

CAS: 7440-33-7

RTECS: YO7175000

OSHA PEL NONE

ACGIH TLV: 5 MG/M3, 10 MG/M3 C


ALUMINIUM

CAS: 7429-90-5

RTECS: BD0330000

OSHA PEL 15 MG/M3

ACGIH TLV: 10 MG/M3


COPPER

CAS: 7440-50-8

RTECS: GL5325000

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES
Health Hazards Acute and Chronic:AS SHIPPED, THE METAL PRODUCT IS AN
ARTICLE. THE LIKELIHOOD FOR HAZARDOUS CONSEQUENCES THROUGH EYE,
SKIN CONTACT, INHALATION, OR INGESTION WOULD BE CONSIDERED MINIMAL.
HOWEVER, IF YOUR PROCESS INVOLVE S GRINDING, MELTING, WELDING,
CUTTING, OR OTHER PROCESS THAT CAUSES RELEASE OF DUST OR FUME,
HAZARDOUS LEVELS OF THESE ALLOYS COULD BE GENERATED. INHALATION:
PRIMARY ROUTE OF EXPOSURE, STEEL DUSTS AND FUMES MAY CAUSE
IRRITATION TO THE RESPIRATORY TRACT. CHRONIC EXPOSURE MAY AGGRAVATE
PRE-EXISTING CONDITIONS. SKIN AND EYE CONTACT: MAY CAUSE IRRITATION
OR SKIN SENSITIVITY. INGESTION: CERTAIN CONSTIT UENTS MAY BE
HARMFUL IF SWALLOWED.
Explanation of Carcinogenicity:LIST OF CHEMICALS KNOWN TO CAUSE CANCER
AND REPRODUCTIVE TOXICITY INCLUDES HEXAVALENT COMPOUNDS OF CHROMIUM
AND NICKEL DUST FROM PYROMETALLURGICAL PROCESSING.
Effects of Overexposure:SYMPTOMS ARE FLU-LIKE INCLUDING: SHORTNESS OF
BREATH, COUGHING, MUSCLE PAIN, FEVER AND CHILLS. GENERALLY,
SYMPTOMS RESOLVE WITH REST IN A FEW DAYS. ALSO SYMPTOMS BASED ON
INDIVIDUAL INGREDIENTS: EYES: IRRITATION. SKIN: IRRITATION,
CONTACT DERMATITIS, ULCERATION, ALLERGIC REACTIONS. INHALATION:
IRRITATION OF MUCOUS MEMBRANES, FIBROSIS, NASAL IRRITATION, CANCER,
KIDNEY AND LIVER DAMAGE, FUME FEVER, SIDEROSIS, CNS SYMPTOMS,
HEADACHE, CHANGES IN MOTOR ACTIVITY AND PSYCHOLOGICAL DISTURBANCES.
Medical Cond Aggravated by Exposure:CHRONIC EXPOSURE TO ALLOY DUSTS AND
FUMES MAY AGGRAVATE PRE-EXISTING CONDITIONS.

First Aid

First Aid:AS SHIPPED, THE METAL PRODUCT IS AN ARTICLE. THE LIKELIHOOD
FOR HAZARDOUS CONSEQUENCES THROUGH EYE OR SKIN CONTACT, INHALATION
,OR INGESTION WOULD BE CONSIDERED MINIMAL. INHALTION: REMOVE PERSON
FROM EXPOSURE TO FRESH AIR. IF BREATHING DIFFICULTY OCCURS, GET
PROMPT MEDICAL ATTENTION. SKIN/EYE CONTACT: FLUSH EYES WITH PLENTY
OF WATER FOR 15 MINUTES, SEEK MEDICAL ATTENTION IF IRRITATION
PERSISTS. WA SH SKIN WITH SOAP AND WATER, IF RASH DEVELOPS, SEEK
MEDICAL ATTENTION. INGESTION: SEEK MEDICAL ATTENTION.

Fire Fighting

Flash Point:NOT COMBUSTIBLE
Extinguishing Media:IN THE FORM SHIPPED, THESE SPECIALTY METALS ARE NOT
COMBUSTIBLE.
Fire Fighting Procedures:NO SPECIAL INSTRUCTIONS OR EQUIPMENT FOR
PRODUCT AS SHIPPED.
Unusual Fire/Explosion Hazard:IN THE FORM SHIPPED, HAZARDOUS
DECOMPOSITION PRODUCTS ARE NOT EXPECTED.

Accidental Release

Spill Release Procedures:LAND / WATER SPILL: AS SHIPPED, THIS PRODUCT
DOES NOT POSE A HAZARD TO THE ENVIRONMENT.

Handling

Handling and Storage Precautions:STORE AWAY FROM ACIDS AND OXIDIZERS.

Exposure Controls

Respiratory Protection:IF INDUSTRIAL HYGENE MONITORING REVEALS AN
OVEREXPOSURE DURING THE PROCESSING OF THE PRODUCT, ENGINEERING
CONTROLS ARE REQUIRED TO BE INSTALLED TO REDUCE EXPOSURES BELOW
OSHA PERMISSIBLE EXPOSURE LIMI TS. IN THE ABSENCE OF FEASIBLE
ENGINEERING CONTROLS, WEAR A NIOSH APPROVED RESPIRATOR FOR
PROTECTION FOR THE TYPE OF PARTICULATE GENERATED.
Ventilation:LOCAL EXHAUST VENTILATION RECOMMENDED TO CONTRROL EMISSIONS
NEAR THE SOURCE OF METAL BEING CUT, GROUND, WELDED, OR MELTED.
Protective Gloves:LEATHER GLOVES WHEN HEATING STEEL PRODUCT.
Eye Protection:SAFETY GLASSES AND FACE SHIELD WHEN GRINDING
Other Protective Equipment:ADDITIONAL PERSONAL PROTECTIVE EQUIPMENT IS
DEPENDENT ON THE OPERATION PERFORMED.
Supplemental Safety and Health

Chemical Properties

HCC:N1
Melt/Freeze Pt:=1315.6C, ######F
M.P/F.P Text:2400F TO 2800F
Spec Gravity:7.5-8.5
Solubility in Water:INSOLUBLE
Appearance and Odor:GRAY SOLID; ODORLESS.

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS, BASES, AND OXIDIZERS
Hazardous Decomposition Products:NONE FOR PRODUCT AS SHIPPED.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:RECYCLE METALLIC BYPRODUCTS AS SCRAP IS
ENCOURAGED. IF BYPRODUCTS NEED TO BE TREATED AND/OR DISPOSED OF AS
WASTES, HAZARDOUS WASTE CHARACTERIZATIONS MUST BE PERFORMED PRIOR
TO TREATING AND/OR DISPOSIN G. CONTACT APPROPRIATE PARTIES TO
ENSURE COMPLIANCE WITH FEDERAL, STATE, LOCAL RULES AND REGULATION
S RELATED TO WASTE TREATMENT AND DISPOSAL.

Toxicology

Toxicological Information:SPECIALTY STEEL ALLOYS ARE GENERALLY NOT
CONSIDERED HAZARDOUS IN THE FORM SHIPPED (SOLID BAR, WIRE, STRIP OR
BILLETS). HOWEVER, IF YOUR PRICESS INVOLVES GRINDING, MELTING,
WELDING, CUTTING OR ANY OTHE R PROCESS THAT CAUSES RELEASE OF
DUSTOR FUME, HAZAREIUS LEVELS OF DUST OR FUMES OF THE CONSTITUENTS
OF THESE ALLOYS COULD BE GENERATED. THE FOLLOWING IS A LIST OF
POTENTIAL HEALTH EFFECTS FOR THE HAZA RDOUS ELEMENTS THAT MAY BE
CONTAINED IN ANY OF THE ALLOYS. PLEASE REFER TO THE HAZARDOOUS
INGREDIENTS PRECEDING FOR A LIST OF THOSE SPECIFIC ELEMENTS
CONTAINED IN THE PARTICULAR ALLOY. (CONTD. SEE "E COLOGICAL")

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ecology

Ecological:(CONTD. FROM "TOXICOLOGICAL") IT IS THE USERS
RESPONSIBILITY TO ASSESSS POTENTIAL EXPOSURES BASED ON THEIR
PROCESSING OF THE PRODUCT. ADDITIONALLY, PROTECTIVE COATINGS MAY
HAVE BEEN APPLIED TO THE ST EEL AT THE REQUEST OF THE CUSTOMER. THE
COATING WOULD REPRESENT LESS THAN 0.5% OF THE TOTAL MATERIAL
PRESENT. MATERIAL SAFETY DATA SHEETS ARE AVAILAGLE FOR THESE
COATING PROCUCTS AT YOUR REQUEST. GENE RAL: WELDING FUME, FUMES
FRESHLY GENERATED BY THE WELDING OF ZINC, MAGNESIUM, AND COPPER,
ARE KNOWN TO CAUSE METAL FUME FEVER. INHALATION OF ALUMINUM , IRON,
NICKEL, MANGANESE, SELENIUM AND TIN HAVE A LSO (CONTD. SEE
"TRANSPORT")

Transport

Transport Information:FOR HAZARDOUS WASTES: DOT (DEPARTMENT OF
TRANSPORTATION): PROPER SHIPPING NAME: HAZARDOUS WASTE SOLID,
N.O.S. (COMPONENT A, COMPONENT B); HAZARD CLASS: 9; NA 3077;
PACKING GROUP: I I I; EMERGENCY RESP ONSE GUIDE NUMBER: 171.
(CONTD. FROM "ECOLOGICAL") BEEN REPORTED TO CAUSE METAL FUME FEVER.
SYMPTOMS ARE FLU-LIKE INCLUDING: SHORTNESS OF BREATH, COUGHING,
MUSCLE PAIN, FEVER, AND CHILLS. GENERALLY, SYMPTOMS RESOLVE WITH
REST IN A FEW DAYS.

Regulatory

SARA Title III Information:311/312 HAZARDOUS CATEGORIES: NOT APPLICABLE
FOR STORAGE OF ITEMS AS SHIPPED, HOWEVER IF PROCESSED, END PRODUCT
MAY REQUIRE REPORTING. 313: PRODUCT INGREDIENTS SUBJECT TO
REPORTING REQUIREMENTS MAY IN CLUDE: CHROMIUM, NICKEL, MANGANESE,
COBALT, COPPER, VANADIUM, TITANIUM, OR ALUMINUM.
Federal Regulatory Information:TSCA (TOXIC SUBSTANCES CONTROL ACT): NOT
APPLICABLE. CERCLA (COMPREHENSIBLE RESPONSE COMPENSATION AND
LIABILITY ACT): NOT APPLICABLE. REGULATIONS SUCH AS CLEAN AIR ACT,
CLEAN WATER ACT, RESOURCE CONCE RVATION & RECOVERY ACT MAY APPLY TO
THE HANDLING OF STEEL GRINDINGS AND PARTICULATES FROM PROCESSING.
State Regulatory Information:CALIFORNIA SAFE DRINKING WATER ACT (PROP
65) LISTING: NICKEL, CAS# 7440-02-0; COBALT, CAS# 7440-48-4.
GOVERNORS LIST OF CHEMICALS KNOWN TO CAUSE CANCER AND REPRODUCTIVE
TOXICITY INCLUDES HEXAVALENT CO MPOUNDS OF CHROMIUM AND NICLEL DUST
FROM PYROMETALLURGICAL PROCESSING.